Tech

‘Reboot And Select Proper Boot Device’ Error and Solution

You may encounter ‘Reboot And Select Proper Boot Device’ error due to many different reasons on your computer with Windows operating system. Do not worry. There are some methods that you can apply in Windows XP, 7, 8 and 10 versions to solve this problem, which generally occurs after the format.

‘Reboot and Select Proper Boot Device’ The error can often appear after you format your computer or during the boot process of the computer that shuts down unexpectedly. ‘Reboot and Select Proper Boot Device’ error is very common Although it is not a problem, when it occurs due to different reasons, it can be extremely annoying and prevent you from using your computer.

For ‘Reboot and Select Proper Boot Device’ error solution There are some alternative solution methods that you can apply. We have explained all of these, but before applying one of these solution methods, ‘Reboot and Select Proper Boot Device’ You should be sure of what problem caused the error and choose the most appropriate solution method for it, or you will continue to receive an error.

What is ‘Reboot and Select Proper Boot Device’ error, why does it occur?

‘Reboot And Select Proper Boot Device’

If you get the ‘Reboot And Select Proper Boot Device’ error on your computer with Windows operating system. There are some fundamental reasons. If you are getting such an error, it means that you are experiencing one of these problems.

  • Incorrect boot issue encountered in BIOS.
  • Disc write errors.
  • Computer shutting down unexpectedly.
  • Virus attack.
  • Keeping the Legacy option on on UEFI-based computers.

In general, the ‘Reboot And Select Proper Boot Device’ error can occur as a result of all the problems we have mentioned here. It’s basically all of this, even if the names are a bit complicated errors caused by incorrect boot. Fortunately, there are some methods you can use to fix this error.

How to solve ‘Reboot And Select Proper Boot Device’ error?

  • Method #1: Make sure it is booting from the correct hard disk.
  • Method #2: Check if your hard disk is failing.
  • Method #3: Disable the Legacy option.
  • Method #4: Use the Windows installation disc.

Method #1: Make sure it’s booting from the correct hard drive:

  • Step #1: Restart your computer.
  • Step #2: Open the BIOS.
  • Step #3: Expand the Boot tab.
  • Step #4: Put your hard disk in the first option of the boot order.
  • Step #5: Save the transaction.
  • Step #6: Restart the computer.
  • Step #7: The ‘Reboot And Select Proper Boot Device’ error will be resolved.

bios

Cause of ‘Reboot And Select Proper Boot Device’ error as we mentioned earlier wrong boot. This error can occur if the boot priority is given to a different disk to format or perform other action. You can have it boot from your own hard drive by following the steps above.

Method #2: Check if your hard disk is failing:

  • Step #1: From here Download Easy Recovery Essentials.
  • Step #2: Complete the program installation.
  • Step #3: Boot through the program.
  • Step #4: Automatic Repair Click .
  • Step #5: continue Click the button and wait for the scanning process to finish.
  • Step #6: If there are any problems, you will face them.
  • Step #7: The operation is ok.

Easy Recovery Essentials

Before running Easy Recovery Essentials, make sure you have a recovery disc. Program, It will fix minor problems that exist however, if there is a hard disk failure that causes the ‘Reboot And Select Proper Boot Device’ error, you should contact technical service or get a new hard disk.

Method #3: Disable the Legacy option:

  • Step #1: Restart the computer.
  • Step #2: Open UEFI.
  • Step #3: Security Expand the tab.
  • Step #4: Legacy Support open the page.
  • Step #5: Legacy turn off the option.
  • Step #6: Save the settings.
  • Step #7: Exit UEFI.
  • Step #8: Restart the computer.
  • Step #9: The ‘Reboot And Select Proper Boot Device’ error will be resolved.

uefi

Cause of ‘Reboot And Select Proper Boot Device’ error if your computer has UEFI system and not BIOS It could be that Legacy mode is on. By following the steps above, you can turn this mode off and have a smooth startup by eliminating the boot issue causing the error.

Method #4: Use the Windows installation disc:

  • Step #1: Connect the Windows recovery disk to your computer.
  • Step #2: Open System Recovery Options.
  • Step #3: Open the Command Prompt page.
  • Step #4: diskpart type and press Enter.
  • Step #5: select disk 0 type and press Enter.
  • Step #6: list partition type and press Enter.
  • Step #7: select partition 1 type and press Enter.
  • Step #8: active type and press Enter.
  • Step #9: Restart the computer.
  • Step #10: The ‘Reboot And Select Proper Boot Device’ error will be resolved.

windows

If you are using Windows Vista, 7, 8 or 8.1 You can eliminate the boot problem that causes the ‘Reboot And Select Proper Boot Device’ error by following the above steps with the Windows installation disc. This method may not work if you are encountering the ‘Reboot And Select Proper Boot Device’ error on new Windows versions.

We answered the curious questions such as what is the ‘Reboot And Select Proper Boot Device’ error, why does it occur, and you can use to fix the error We talked about alternative methods. Do not try to apply the solution methods before finding the problem causing the error, different problems may occur due to the wrong operation.